旭崇 加热固化炉 XCH87-B1

 文件下载    |      2019-08-18 20:10:42
旭崇 加热固化炉 XCH87-B1

旭崇 加热固化炉  XCH87-B1

 Heat Solidifying M/C  XCH87-B1  

 

设备用途 Application

1 本产品适用于各种不同产品加热工艺设备配备加热炉、温控系统、FFU和电控系统等部分构成

2 广泛应用于:各种水胶固化,产品加热,生产工艺。

 

1 The machine is used for heating process of various products and equipped with heater, temperature controlling system, FFU and electronic controlling system.

2 Widely used in solidifying all kinds of LOCA or heating products during production process.

 

 

产品细节 Details

人机操作界面  Operating Interface

温度显示  Temperature Indicator

操作控制按钮  Operating Button

固化层机构  Group of Solidifying Layer

空气过滤机构  FFU

 

产品介绍  Introduction

1 人工将需加热的产品一层一层放入加热炉内;

2 关好门,按下加热按钮;

3 加热温度达到后开始计时,达到时间后轰鸣器报警,产品加热OK

4 打开门,人工将产品取出;

5 重复以上动作。

 

1. Put product manually into the layers.

2. Close the door, press heating button.

3. The machine will start timing when heating temperature is reached, sounding device alarm after timing reached, heating OK.

4. Open the door, remove the products.

5. Repeat the above actions.

 

 

产品参数  

输入电源:380V 50-60HZ

Input Power: 380V 50-60HZ

额定功率:20KW

Rated Power: 20KW

水平调节:千分尺调节

Horizontal Adjustment: Micrometer

托盘尺寸:500*400mm

Dimension of Layer: 500*400mm

安全防护:静电防护+超温保护+漏电保护

Safety Protection: ESD protection + overheat protection + leakage protection

加热结构:发热管恒温加热

Heating Structure: Constant Temperature

载台:手动拉动托盘

Platform: Layer

程序控制:LG-PLC

Controlling Program: LG-PLC

外型尺寸:L1560mm*W1180mm*H1780mm(不含FFU

Dimension: L1560mm*W1180mm*H1780mm (exclude FFU)

设备重量:380KG

Weight of Machine: 380KG

 

功能特点  Features

1 人机界面可通讯温度控制器,直接修改温度及加热时间。

2 温度显示可方便观察每层温度,每层温度单独可调。

3 操作按钮,此按钮为带灯加热按钮,产品加热完成。会关闭按钮灯,方便知道哪层加热完成。

4 固化层,每层采用单独开关门,透明门,每层有单独托盘取出。

5 FFU空气过滤器能有效过滤外界空气带来的灰尘,保证一个良好的生产环境。

 

1 Heating temperature and time can be set and revised in operating interface.

2 Temperature of each layer can be observed through temperature indicator and also can be set independently.

3 When heating finished, the light in operating button will off, which is convenient to know which layer is complete heating.

4 Group of solidifying layer adopted transparent door, it’s easy to take and observe.

5 Dust can be filtered from outside effectively by FFU, which guarantees a good production environment.

 

 

工艺流程  Process

加热固化    Solidifying

 

辅料  Accessories

无尘布  Dust-free Cloth

酒精  Ethanol

棉棒  Cotton Swabs

本文由http://www.bathnod.com/wenjianxiazai/45.html原创,转载请备注出处谢谢配合!

下一篇:驰速自动化旅游通知上一篇:深圳步进电机-转台式自动拧螺丝机